Standing Water in Water Softener Salt tank? | Solution
If you are seeing the standing water in the water softener salt tank (called as Brine tank), it could be a normal thing but if the overflow is more than usual then you must check what’s wrong and is everything is right. In this post we are going to mention all the issues which could relate to this issue and what are the solutions to these.
Incoming brine line hose is disconnected
Yes this could be possible that the brine line hose is disconnected. There is a waft which controls the level in the brine tank. So check if it’s not disconnected or faulty.
Bottom of the tank Blocked with Salt
There is a slot which controls the overflow of the water from the bottom, if there is any blocked salt or its clogged then it will make it difficult to reduce overflow of the water. You should check the brine tank if in the bottom that salt or any thing is not clogged or blocking the flow. If its seem clogged then clean your brine tank and again fill with new salt.
Clogged control valve (Drain flow)
Most of the time in the place where well water is being used that means it has lots of other minerals and iron in it. Because of resin frequently, you may see a clogged control valve. If that is the case on your side then clean it out and the problem may be solved by this.
Clogged injector as well can be fixed by just cleaning it and removing the clogged salt. Calcium Lime Rust is the solution which can be used to remove the clogged area. If it’s still facing the blockage then you should replace this.
Brine level control Problem
If all the above things are alright and still facing issues, then float may be the problem in your case. It’s better to remove and clean it out, remove the cap of the top of the brine well. If the cap is not there or missing then it can as well cause the clog there.
Electronic Or Faulty spacer and/or pistons
There are some electronic controls, spacers and pistons in water softener, if your water softener is still massing then these could as well create the issue and make it overflow or make your brine tank full of water. If you are facing the issue because of these then you should hire any expert of water softener to check out all the electronic devices, spacer or piston if required.
Q. Is there supposed to be water in the salt tank?
Ans: Yes, There will be a small amount of water in the salt tank, but if it is overflowing then there is some issue and it needs to be fixed.
Q. Can you overfill a water softener with Salt?
Ans: No, It is not good practice, you must fill it on a given gauged only.
Our Top Picked Water Softener Resin Cleaner
If your Water Softener need maintenance, I would suggest you to check our reviewed Best Water Softener Resin Cleaner. Which will make your water softener life longer and make it more efficient.
Are you Looking for Water Softener Shower Head too, Then Check our List of Best Water Softener Shower Head Filters 2020
Check out our Best Water Softeners Review for 2020.